A new or replacement driveway, dug out to firm ground, packed, poured to the right thickness and sloped so water runs to the street, not the garage.
Concrete contractor in Grand Terrace, CA - slabs that sit right and shed water
Riverside Concrete Company pours driveways, patios, walkways, steps and other concrete work for homes and small properties in Grand Terrace, CA, with the base dug out and packed and each slab sloped to carry water away.
- Licensed and fully insured.
- Free in-person estimates.
- Expect a reply within 1 business day.
Concrete work we do in Grand Terrace
Most of our Grand Terrace calls are for driveways, patios and walkways that need to drain properly, plus steps, walls and footings where a yard changes level.
A backyard patio slab with a broom finish, a light brushed texture for grip, set to fall away from the house so water drains off.
Concrete pressed with patterned mats while it's soft so it looks like stone, brick or tile, for patios, walks and entries where you want more than a plain slab.
Front walks and side-yard paths poured to a steady grade, with control joints, cut lines that give cracks a straight place to form.
A new or replacement garage slab over a packed base, with rebar, steel bars that hold the concrete together, where your cars and storage call for it.
Colored, exposed-stone or textured finishes for walks, patios and entries, for homeowners who want something warmer than plain gray with the same solid slab underneath.
Poured concrete walls that hold back soil where a yard steps down, built on footings with drainage so trapped water doesn't build up and push on them.
Interior slabs for additions, workshops, sheds and converted spaces, poured level over a prepared subgrade, the packed ground the slab sits on.
Slabs around a swimming pool with a finish that grips wet feet, sloped toward drains or the yard so splash and rain don't stand on the deck.
Front and back steps poured with even rises so nobody catches a toe on one odd step, tied firmly into the walk or porch they meet.
The slab foundation a new garage, addition or backyard unit sits on, poured to the approved plans with the thickened edges and steel they call for.
Foundations for additions and outbuildings, from layout and digging to forms, steel and the pour, built to the drawings and ready for the inspector's visit.
Concrete parking areas and drive aisles for small businesses, churches and multi-unit properties, built for daily traffic and graded so water leaves the lot.
The buried concrete under walls, posts, patio covers and additions, dug to the depth and width the plans call for so what's above stays put.
Lifting a settled slab or foundation back toward level once we've found why it sank, so the same soil or water problem doesn't undo the work.
Saw-cutting existing concrete for drain lines, removals, new openings or a clean edge where new work meets old, with water on the blade to hold down dust.
Why Grand Terrace homeowners call our Riverside crew
Grand Terrace is a small, mostly residential city, and the calls we get there tend to be about the same few things: a driveway that has cracked or dropped, a patio where water sits against the house, steps pulling away from the porch, or a yard that needs a wall. As a concrete contractor based in Riverside, CA, we work here the same way we do in Colton and back home in Riverside. The price mostly comes down to the size of the slab, how much old concrete has to come out, how much base work the ground needs and the finish you choose. The schedule turns on the weather, the curing wait and whether the city has to issue a permit first. Your written estimate gives you your own figure, with what's included spelled out.
Blue Mountain rises along the east side of the city, and yards nearer it tend to slope, so water coming downhill and changes in grade shape a lot of what we build there. That's why we look at where the water goes before we talk about finishes.
- Licensed, fully insured, in business since 2013
- Slabs sloped to shed water
- Straight answers, even about other options
How we handle a Grand Terrace job
I write the estimate
I come out to look at the job and write the estimate myself, in writing, with everything that's included spelled out.
Permits settled up front
I look at each job with the city's building office in mind and settle with you up front who applies for anything it requires.
The base comes first
The base disappears on pour day, so it's often the first budget cut, but I'd rather trim the finish, because a slab is only as steady as what's under it.
There on pour days
Our lead finisher runs the crew on site, and I'm there on pour days, a habit from years on a city public works crew with an inspector watching.
- Dig out to firm ground and pack the base
- Check where the water runs first
- Slope every slab away from the house
- Cut control joints before cracks pick their spot
- Keep fresh concrete damp while it cures
- Protect lawns, plants and walls
- Haul off old concrete and debris
- Walk the finished job with you
- Say so when someone else fits better
A slab looks good on day one either way, so ask how the base and drainage will be built, because that's what decides how it holds up.
What signs mean your Grand Terrace concrete needs work?
Water and movement are what usually undo a slab here, and these are signs you can spot from your own driveway before a small problem turns into a tear-out.
- Cracks that keep getting wider
- One side of the slab sinking
- Water pooling after rain or watering
- Patio tipping toward the house
- Edges crumbling or breaking off
- Chipping or a dusty, flaking surface
- Gap opening between slab and wall
- Steps pulling away from the porch
Riverside Concrete Company, serving Grand Terrace
Call (951) 631-9520, email sales@riversideconcretecompany.com or use the form to describe your project and ask for a free estimate, and expect a reply within 1 business day.
- Phone
- (951) 631-9520
- Hours
- Mon–Sun: 6 AM–11 PM
- Location
- Riverside, CA 92501
Grand Terrace concrete questions
Who issues building permits for concrete work in Grand Terrace, CA?
The City of Grand Terrace's Building and Safety Division issues building, grading and related construction permits, and it reviews plans against local, state and federal rules. It also answers general questions about permits, inspections and code, so call (909) 954-5200 or email cogt@grandterrace-ca.gov if you're unsure whether your project needs one. When we're the ones applying, I bring our license paperwork to the counter.
Does a concrete contractor need a California license to work in Grand Terrace?
Yes, for nearly any driveway, patio or wall job, because California's Contractors State License Board requires a license once a project needs a building permit, uses other workers, or reaches $1,000 in labor and materials. The board also says contractors, subcontractors and home improvement businesses included, must be licensed before they submit a bid. We're licensed and fully insured.
How do I request a building inspection in Grand Terrace?
Email your request to Inspections@grandterrace-ca.gov and make sure you get a confirmation back, because the city asks you to confirm your inspection is set. The Building and Safety Division can answer questions about what's being inspected. On our jobs, we cover the inspections in the same conversation where we settle who applies for the permit.
How much does a new concrete driveway cost in Grand Terrace?
The cost of a Grand Terrace driveway comes down to its size and thickness, how much old concrete has to be broken out and hauled off, how much digging and base work the ground needs, and the finish you choose. A broom finish costs less than stamped or colored work, and fixing a drainage problem adds to the job. Your free written estimate lists each of those, with no obligation.
How long does a new concrete driveway take to cure before I can drive on it?
Usually you can walk on new concrete after a day or two and drive a car on it after about a week, though cool weather and heavier vehicles stretch that. The wait is curing, and rushing it is how edges chip and surfaces turn dusty. We'll tell you on pour day when it's ready for feet and when it's ready for tires.
What causes concrete to crack and sink in Grand Terrace yards?
Most cracking and sinking comes from a weak base, water getting under the slab, or control joints that were cut late or skipped. A base raked level instead of dug out and packed settles with the dirt, and a slab that drains toward the house sends water where it does damage. Concrete still cracks a little as it shrinks, so we cut joints to keep any cracks in straight lines we chose.
Other cities we serve, plus yours
Read the city pages listed here, or call (951) 631-9520 if your city isn't one of them, since we work in many cities around Riverside.
Get a Riverside Concrete Company quote in Grand Terrace
Estimates are free and written on site, with no obligation, and we reply within one business day.